Understand the structure of the packing support plate
Release time:
2024-05-11 14:56
Source:
1. structure
The packing support plate is usually composed of two parts: a plate body and a support foot. The plate body is a flat plate structure with strong load-bearing capacity. The supporting foot is fixed on the reactor shell, which can ensure the stability of the packing support plate. The filler support plate needs to be provided with holes in advance, so that the filler can enter the reactor through the holes and be evenly distributed.
2. composition
The plate body of the filler support plate is usually made of a metal material or a polymer material. The support legs can be made of the same material as the reactor shell to ensure the fixing performance. At the same time, in order to increase the service life of the filler support plate, a processing process such as anti-corrosion treatment or heat treatment is usually required.
Principle of 3. operation
The main function of the filler support plate is to provide support for the filler, so that the filler can be evenly distributed and the reaction efficiency can be increased. During the operation of the reactor, the reactants enter the reactor through the reactor inlet, and the filler support plate supports the filler thereon, so that the reactants react with the filler. The reaction product is discharged from the intermediate channel of the filler through the lower hole of the filler support plate to the reactor for subsequent treatment.
4. Application Areas
The filler support plate is widely used in chemical, pharmaceutical, petroleum, metallurgy and other fields, and can be used to improve the reaction efficiency of the reactor and ensure the stability of the reaction product. The structure and composition of the packing support plate can be customized according to actual needs to meet the requirements of different reactors.
Previous Page
Related News
Influence of different inlet and outlet water temperature on type selection of cooling tower
Different inlet and outlet water temperatures have a certain influence on the selection of cooling towers. A cooling tower is a device used to cool industrial processes. Its main function is to reduce the temperature of the system through the evaporation of water.
Factory must see: what is the cooling tower filler? And maintenance methods!
For the summer factory, there is a very important thing-cooling tower filler. It is mainly a material used in the cooling tower, when it comes to the cooling tower, it can also be understood as a cooling effect from the literal meaning. Today we will explore what is the cooling tower filler?
The water (hot water) that needs to be cooled is splashed into water droplets or a water film is formed to increase the contact area and time between water and air and promote the heat exchange between water and air. The cooling process of water is mainly carried out in the filling of water.
Understand the structure of the packing support plate
The packing support plate is an important structure for supporting the packing, which has the characteristics of good stability and strong durability. This paper introduces the structure, composition and operation principle of the filler support plate, and points out that it has wide application prospects in the fields of chemical industry, pharmacy, petroleum, metallurgy and so on.
Function of Packing Support Plate in Packed Tower
This can improve the mass transfer efficiency and reaction efficiency of the packed column.
What are the advantages of closed cooling towers over traditional open cooling towers?
The open cooling tower uses the circulating water to spray on the packing of the cooling tower in a spraying manner. After the water contacts with air, heat exchange is achieved, and then the air flow in the tower is driven by the fan to circulate, and the hot air flow after heat exchange with water is brought out and then reaches the cooling target. The closed cooling tower uses the contact between water and the coil to take away the heat of the cooling medium in the coil through the heat transfer of the outer wall of the coil to reach the heat exchange.